Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will protect your precious vehicle from key-long theft as well as relay theft. With a unique PIN sequence, unless you have the correct code, your car won't start!
It also comes with Transport Mode that allows you to temporarily disable the device and is perfect for vehicle transport and servicing. ghost 2 immobiliser cost is then activated by entering a PIN again.
No Key Fobs or Led Indicators
The Ghost 2 immobiliser is a innovation in automotive security technology that provides a strong defense against the latest methods of car theft. Its invisible and engine start blockage reduces the possibility of theft, offering peace of mind while saving money on insurance.
It isn't detectable by scanners, and cannot be hacked with common methods such as key cloning or signal jamming. The device utilizes buttons in your vehicle, such as those on the steering wheel, door panels and centre console to create an individual, programmable PIN code sequence that is up to 20 presses long. If the correct sequence is entered or in the event that the beacon or mobile app is utilized, only the owner is able to start the engine, providing an additional layer of security against thieves.
You can also turn on a convenient service mode for situations such as valet parking and servicing that require you to temporarily disable the system. The mobile app makes it simple to do this, and ensures that your vehicle is protected during the time it is being repaired. It is simple to change to secure mode when the work is completed and ensure that your vehicle is fully protected at all times.
The Ghost 2 is far more user-friendly than other systems that require fobs. The application can also be used as a spare key in case of emergency. This lets you drive with your security turned off, without having to enter a pin code.
No Radio Frequency Signals
Contrary to traditional security systems which come with their own remote The Ghost 2 immobiliser doesn't require any additional key fobs or keys and can be operated using buttons already on the steering wheel or centre console. It is also unnoticeable by thieves using RF scanning or grabbing technology. This means that your car won't be able to start for it even if they manage to steal your keys.
The device employs an unique password sequence of buttons that locks the engine. This unique PIN code can be entered through the app or using the vehicle's existing buttons on the steering wheel and on the centre console. This will allow you to also lock the gearbox and ensures that your vehicle cannot be driven away until you have a key or are able to enter your pin code. The device can be set in Transport mode to allow you to drive your vehicle without having to enter your pin code. autowatch ghost immobiliser will provide extra protection for your vehicle if it is parked at a valet or service park.
The Ghost 2 immobiliser was designed to be as discrete as possible, making it a great theft deterrent. This makes it an ideal choice for those who spent a lot on customising their cars or own expensive or rare vehicles. Many have stated that the device is an excellent option to stop their cars from being stolen. Many have told stories of attempted thefts of cars that were stopped by it. The Ghost 2 also offers a wide range of options, with customers reporting that it works with their regular car keys and also with the emergency button on their vehicle, giving them peace of mind when they're away from their vehicle.
No Radio Frequency Scanners
Secure your vehicle from key cloning, hacking and key theft with the Ghost immobiliser. The system makes use of the buttons on your vehicle, such as those on your steering wheel and dashboard to create a unique and programmable button sequence that only you know. Your car will not start without this sequence. The combination of a unique disarm sequence and the absence of radio frequency signals makes it extremely hard to attack or evade.
The Ghost CAN Immobiliser is a safer alternative to devices approved by Thatcham that rely on radio frequency scanning. It works silently without external signals and does not rely on any external signals. It's a safer alternative and also offers insurance approved status when installed by an TASSA approved installer (we're one of them! ).
Because of the nature that the Ghost immobiliser is integrated into your vehicle, it is strongly recommended to have an expert installer complete the installation. This ensures that it is fully integrated with the vehicle's systems, which results in optimal performance and a significantly less chance of failure.
Furthermore, professional installation usually includes warranties and support that further increase the value of your investment. This is a major deterrent for potential thieves who are less likely than before to attempt to bypass the device because of its extensive security features.
In addition to being an effective deterrent to thieves In addition to being a great deterrent against thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly too. It can be programmed to automatically re-arm for a specific amount of time after parking your vehicle. This way, you don't need to remember your PIN code every time. It also allows the flexibility of Service/Valet Mode in the event that you need to turn your vehicle over to service or valet parking. It can be enabled or disabled depending on your preference. a simple indication sequence.
No Wire Cutting
The Ghost 2 does not require cutting any wires in your car to install, ensuring non-invasive integration with your vehicle's original systems. It connects to your vehicle's CAN data network and is equipped with a unique PIN, preventing anyone else from starting your engine if they do not have a personalised PIN sequence or app authorisation.
It is also unnoticeable by the specialised scanners that thieves employ and is silent because it doesn't send out radio signals like other immobilisers. It is weatherproof, sealed, and small enough to hide anywhere within the vehicle.
Another advantage of the Ghost II is that it can be put into "transport mode" for short periods without the need for an individual PIN sequence. This is a great option for situations like giving the car to a friend or family member, or in an emergency. You can start your vehicle quickly and safely.
It is important to work in a well-lit space when installing the Ghost II. You should also wear safety gear while working with electrical components and tools. A basic set of hand tools can enable you to create precise connections, and a multimeter can be used to verify electrical values and ensure your wiring is secure. Cable ties and insulation tape can also be used to protect or connect any cut or exposed wires during the process of installing.
It is also essential to disconnect the battery prior to beginning any wiring work on your vehicle. This will stop any airbag deployments that happen accidentally or electrical shocks from occurring when the battery is accidentally disconnected while the Ghost II is still connected to the vehicle's system.
Easy to Install
The Ghost immobiliser is a unique next generation device that works by connecting directly to the vehicles CAN Data Network and using an individual PIN Code to stop your car from starting. This makes it more difficult to hack than standard alarm systems or aftermarket key fobs and also provides greater protection against key cloning hacking as well as relay attacks.
The device can be concealed inside your vehicle, and it uses the buttons already on your dashboard and steering wheel to create the sequence you know. This is a deterrent to thieves using a fake car key to start it and also wards off the use of a diagnostic tool which thrives on hacking OBD.
Installation is easy and does not require cutting wires. The unit is connected to the vehicle's CAN bus using a constant 12V supply identified and a grounding connection. Basic hand tools are sufficient to install the unit, and a multimeter can assist with pinpointing the correct wires. Insulation tape or heat shrink tubing is recommended to safeguard the connections and cable ties can be utilized to keep the wiring neat and tidy.
Once installed, the unit is put into a learning mode that captures your specific buttons or sequences to create your unique pin code. This information is later stored in the CAN data network, which makes it impossible for anyone else to replicate the sequence and start your vehicle.
Should you ever forget your PIN Code, sell your car or the button becomes inoperative, there is an emergency override function known as Transport Mode. This will turn off the Ghost system completely, but will automatically activate when you exceed 31 mph for more than 15 minutes or you enter your PIN Code. This is great for those who frequently rent their vehicles via services such as Turo or ZipCar.